Hubs, QRs

Active filters

Front ANTAI DISK hub

Inexpensive front wheel hub with disc brakes. The model is made of a steel body, has a high flange and a cast disc rotor mount. The Antai hub has a solid 495 grams. Spoke Hole: 36 Axle dimensions: Ø9 * 140mm Rotor mount: 6-bolt Bearings: 2 sealed Braking system: rotor Material: steel Fastening: nuts Weight: 495 gr

$2.60

Rear v-brake hub Avanti, threaded on nuts

A budget hub for the rear wheel of a bicycle. The low part is amortized by the simplicity of the design from the steel body, the riser fastening of the rear windows to the type of jogging and the integral axle from the cogging at the eyes of the nuts. Steel Hanging on nuts Rіzbove krіplennya pіd trіshchinu Open pid 28 spoke The sheerness of only with rim galms

$2.29

V-brake hub, front Kinetic AE-248F

A budget hub for the front wheel of a bicycle with rim brakes. The Kinetic 248F model has a low price due to the steel body and one-piece axle with nuts. The weight of the Kinetic 248F is 315 grams.

$2.73

Rear hub Kinetic AE-248R

Low-cost steel rear hub Specifications: Spoke Hole: 28 Production material: body and axle - steel; Sleeve width 130 mm; Axle length: 170mm; Axle diameter: 3/8 "" (9.5 mm.); Flange spacing: 57mm; Flange diameter: 54 mm; PCD (diameter between the holes for the spokes): 45 mm; Applicable: ratchet 6.7 stars; Bearing: ball bearing (cone-cup system); Braking system: V-brake; Fastening: nuts; Weight:...

$2.73

V-brake bushing, front QUANDO KT-122F

A budget-friendly 36-spoke V-Brake eccentric front hub for entry-level touring or mountain bikes. Fastening to the frame with nuts. Peculiarities: 36 spoke holes Axle dimensions: 3/8 '* 100 * 140mm Flange spacing: 69mm Flange diameter: 38mm Material: steel Weight: 250g

$1.30

Front hub QUANDO KT-FMD7

Quando KT-FMD7 bicycle front wheel hub. Aluminum housing with loose bearings, hollow eccentric shaft and 6-bolt rotor attachment. Quando FMD7 comes in two colors and weighs 275 grams.

$5.20

Eccentric KT

Эксцентрик KT 115мм чёрный

$1.43

Front CENTER LOCK hub SP PL-8X 32H

To make the hub dynamo interesting to a wider audience, Shutter Precision has developed a center-locking version for the 8X series. The PL-8X is ideal for center locking disc brakes and is officially licensed from Shimano. The PL-8X achieves 78% efficiency at 15 km / h. But not only is it powerful ... the PL-8X is also very smooth. In keeping with Shutter Precision's design philosophy, its...

$178.00